Davidson NC CNC Machining | Precision Milling, Turning, CMM
Davidson manufacturers around Lake Norman plan builds that leave little room for rework. Farris Group provides CNC machining in Davidson, NC for carbon steel, stainless steel, and aluminum across plates, housings, spacer stacks, shafts, and bracketry.
Work is governed by an ISO 9001:2015 certified quality system that embeds risk planning, corrective action, and traceability from heat lot to finished part.
Process Blueprint: How Accuracy Is Built
Programs are released only after a drawing and model review confirms GD&T, datum structure, and thread specifications. 3- and 4-axis milling uses high-efficiency roughing for stable tool loads and measured finish passes that protect flatness and surface integrity.
CNC turning monitors concentricity and runout; when geometry allows, live-tool features are completed in the same setup to limit stack-up. Hole-making cycles control drilling, tapping, and reaming. Precision bores are finished with boring heads to hold true position.
Verification blends probing and calibrated gauges during the cycle and a CMM or height-stand routine at final inspection. Typical production capability targets ±0.001 in on standard work, with tighter windows quoted based on demonstrated process capability. On request, stainless parts are passivated per ASTM A967, and aluminum details are routed to anodize or coating. Deburr follows a specified edge break. Engrave or durable marking supports maintenance and warranty tracking. Packaging uses trays, sleeves, and kitted groups by subsystem for fast line placement.
Procurement Kit: Files, Freight, and Coverage
Davidson projects tied to public programs need clean records. As a FedLinks Verified Federal Vendor, Farris Group supplies material certs, dimensional reports with balloon references, and thread-gauge summaries in a consistent packet. Freight is planned to the receiving window with labels that map to work orders and cell locations.
Speak to a machining coordinator at 704-629-4879 or visit our website at Farrisgrp.com to request an expert consultation.
Service includes the United States, Canada, Mexico, and Germany.
.
Frequently Asked Questions about Machining Services in Davidson, NC
Can reports reference balloon numbers on the drawing?
Yes. CMM outputs are tied to the ballooned print.
Do you log heat lots and revision levels per traveler?
Yes. Heat lot, revision, and operator checkpoints are recorded.
Is serialization available for maintenance programs?
Yes. Parts can be serialized and linked to inspection data.
