Painting and Powder Coating Dallas NC | Industrial Metal Finishing | Farris Group
We work with manufacturers, fabricators, and maintenance teams that operate in and around Dallas, NC. Their parts see forklifts, weather, washdowns, and constant handling. Our job is to help those parts last.
We provide industrial painting and powder coating
in Dallas, NC for carbon steel, stainless steel, and aluminum. Typical work includes machine guards, brackets, structural components, enclosures, racks, and weldments.
Every order moves through an ISO 9001:2015 certified quality system that defines routing, checks pretreatment chemistry, verifies cure, and controls inspection steps. Travelers carry part numbers, revisions, and test data from receiving to final packaging.
Our goal is simple. The finish should match the specification, look right when it arrives, and stay on the part throughout its service life.
Our Coating Path: Pretreat, Apply, Verify
We begin with surface preparation. Parts move through alkaline wash and rinse stages to remove cutting fluids, fingerprints, and shop debris. Based on the substrate and service environment, we apply iron phosphate for steel or zirconium conversion coating when the project calls for an upgraded corrosion profile. When mill scale or weld discoloration is present, we introduce blasting to build a consistent anchor pattern.
Masking plans protect features that must stay free of coating. We use silicone caps, high temperature tapes, and shaped plugs to keep threads, bores, sealing faces, and grounding points clean. Masking information is documented so it repeats from batch to batch.
Powder is applied in enclosed booths using electrostatic guns. Operators monitor gun distance, angle, and flow to keep coverage even and avoid thin areas in corners and cutouts. Many exterior systems target a 2.0 to 4.0 mil dry film thickness range. Interior components may run a different target band based on the system. When drawings specify liquid coatings, we spray epoxy primers and urethane topcoats designed for industrial duty.
Cure cycles are verified using metal temperature probes placed on representative parts. Time at temperature is logged, not only oven setpoints. After parts cool, we check film thickness with calibrated gauges and perform visual inspections. When required, we can perform and document adhesion and impact checks appropriate to the coating system.
Parts then move to packing. We use foam, edge protection, interleaving, and kit-level cartons so components for the same assembly arrive together and protected.
Documentation, Delivery, and Where We Ship
We are a FedLinks Verified Federal Vendor, so we can support Dallas projects that require clear coating documentation. That may include pretreatment records, cure logs, film thickness summaries, and certificates of compliance bundled with your shipment and available digitally.
Shipments are scheduled to your dock hours. Labels can reference work orders, project names, or line locations. We can package bulk pallets for stock or create labeled kits that go directly to a specific cell or job site.
To review an upcoming finishing project in Dallas, NC, call 704-629-4879 or visit Farrisgrp.com to upload part drawings and coating specifications.
Frequently Asked Questions about Painting and Powder Coating Services in Dallas, NC
Can Farris Group document film thickness results for each batch?
Yes. We can record minimum, maximum, and average DFT readings and include them in the job packet.
Does Farris Group work with both small brackets and larger weldments in the same order?
Yes. We plan racking and masking so that mixed-size parts move through the line efficiently.
Can Farris Group provide test panels alongside production parts?
Yes. We can coat panels with the same system for lab tests, color approvals, or future reference.
