Powder Coating and Painting Statesville NC | Industrial Metal Finishing | Farris Group
Finishing Solutions for Statesville Manufacturers
Statesville supports a broad mix of manufacturers that ship products across the region and the country. Many of those products rely on finished metal components that have to perform in warehouses, plants, and outdoor environments. Farris Group provides industrial painting and powder coating in Statesville, NC for steel, stainless, and aluminum parts. They finish brackets, panels, enclosures, support structures, and fabricated weldments that must meet both cosmetic and functional requirements.
Their finishing department operates under an ISO 9001:2015 certified quality system. Routing, work instructions, pretreatment checks, gun settings, and cure verification are documented so that repeat orders behave the same way from batch to batch.
How Parts Move Through the Coating Line
After incoming inspection and count verification, parts move into cleaning stages that remove oils, dirt, and light rust. Pre-treatment typically includes iron phosphate for steel. When project requirements call for higher corrosion resistance with specific coating systems, zirconium conversion coatings can be used. When weld scale and rough cut edges appear, media blasting can be added to deliver a uniform profile for adhesion.
Masking is set around threaded holes, machined faces, and contact surfaces. Silicone caps, plugs, and high temperature tapes protect these areas while still allowing proper racking and grounding.
In the spray booth, powder is applied using electrostatic guns that are tuned for voltage, flow rate, and pattern. The goal is a consistent film build that covers edges and recesses. For projects that specify liquid coatings, Farris Group applies epoxy primers and urethane topcoats selected for industrial duty.
Cure cycles are tracked using metal temperature probes affixed to representative parts. Time at temperature is recorded so that cure is validated on the parts themselves. After cooling, inspectors measure film thickness using calibrated gauges, check appearance, and confirm masking. Where specifications require it, adhesion or impact checks can be documented.
Packaging is configured to match the way Statesville customers handle the parts. Parts can ship in bulk cartons or as project-specific kits that group components by area, line, or subassembly.
Records, Compliance, and Ship-To Regions
As a FedLinks Verified Federal Vendor, Farris Group can support Statesville projects that require documented finishing records. This can include pretreatment logs, cure data, film thickness reports, and certificates of compliance. Records can be archived by purchasing and quality teams for future audits.
Shipments are scheduled with the customer’s receiving capacity and project timelines in mind. Labeling can follow internal job numbers or system tags to simplify staging and installation.
To request powder coating or industrial painting in Statesville, NC, contact Farris Group at 704-629-4879 or visit Farrisgrp.com to share part details and coating requirements.
Delivery & Service Areas: United States; Canada; Western Europe.
Frequently Asked Questions about Painting and Powder Coating Services in Statesville, NC
Can Farris Group provide color targets that match existing equipment in our plant?
Yes. Farris Group can work from color chips, codes, or existing parts and produce approval panels.
Does Farris Group handle expedited finishing if we provide a firm deadline?
Expedited work can be evaluated case by case based on current schedule and coating requirements.
Can finished parts be labeled by project number and sequence?
Yes. Labels can list project codes and sequence information to help with installation order.
